Mr. Cool · Vermont service
Mr. Cool Heat Pump and Mini-Split Maintenance in Vermont
Professional Mr. Cool cleaning across Vermont. Same-week appointments. Flat $199 per indoor unit. Our technicians are trained on Mr. Cool disassembly across the common models installed in Vermont homes.
About Mr. Cool mini-splits
DIY-installable units common in owner-installed Vermont retrofits. Performance is solid in moderate cold; quality varies by model line.
Common Mr. Cool issues we see in Vermont
- · Refrigerant line connection issues at the field-installable couplers
- · Drain pan algae buildup
- · Filter clogging faster than premium brands
Our Mr. Cool cleaning approach
Mr. Cool deep cleaning follows the same procedure as any mini-split. We check the field-installed line connections during the visit since these are a known weak point.
Pricing
| Service | Price | What is included |
|---|---|---|
| Heat pump cleaning (per indoor unit) | $199 first unit, $149 each additional | Disassembly, deep clean of blower wheel, coils, drain pan, filter; outdoor unit clean; system test |
| Maintenance plan, twice yearly (single unit) | $279 per year | Two visits per year: full cleaning in spring, filter and drain check in fall. Priority scheduling. |
| Maintenance plan, twice yearly (multi-unit, 2-4 units) | $379 - $479 per year | Same as above for 2 to 4 indoor units. $379 for 2 units, $479 for 4 units. |
| HRV / ERV cleaning | $99 add-on, $149 standalone | While we are on site for a cleaning, $99. Standalone visit, $149. |
| Dryer vent cleaning | $99 add-on, $149 standalone | While we are on site for a cleaning, $99. Standalone visit, $149. |
| Bathroom vent cleaning | $99 add-on, $149 standalone | While we are on site for a cleaning, $99. Standalone visit, $149. |
| Range hood vent cleaning | $99 add-on, $149 standalone | While we are on site for a cleaning, $99. Standalone visit, $149. |
Mr. Cool FAQs
Can you clean a DIY-installed Mr. Cool mini-split?
Yes. DIY installation does not affect cleaning. We follow the same procedure as any mini-split: pull the blower wheel, deep clean the coil and drain pan, rinse the outdoor unit, and verify drainage out the condensate line.
Do you check the field-installed Mr. Cool line set connections during a cleaning?
Yes. Mr. Cool uses field-installable quick-couplers on the refrigerant lines, and these are the most common point of slow leaks in DIY installs. We inspect for oil residue at the couplers during the visit and flag any suspect connections.
Why does my Mr. Cool filter clog so much faster than my friend's Mitsubishi?
Mr. Cool filters are a finer mesh on most models. They catch more, which is good for indoor air, but it also means they load up faster. We recommend rinsing the filter every 4-6 weeks during heavy use rather than the every-3-months cadence printed in the manual.
Get your heat pump cleaned this month.
Same-week appointments across Vermont. Flat $199 per indoor unit. No surprise quotes.